Experience Sitecore ! | All posts tagged 'Visual-Studio'

Experience Sitecore !

More than 200 articles about the best DXP by Martin Miles

10 Useful tricks for Helix development

2. December 2017 Martin Miles (0)

1. First, is the most important hotkey that published a single file - whether a static file oк Razor view, to the web folder, preventing you from running gulp script. Selecting the desired file, hold ALT and then click ; (semicolon) and p. Your file will be immediately available at web destination. Then most time-taking is Application pool recycle process, running each time you add/remove/modify a config file or DLL, so current approach prevents you from wasting time on that. The result:



2. Next, in order to run Sitecore in a debugger, one usually need to go to "Debug" menu of Visual Studio, then pick up "Attach to process". Then find w3wp.exe from a long list of available processes after selecting "Show processes from all users" checkbox. When you need to do that multiple times in a day (and you do) it becomes an unwanted waste of time. There is a Visual Studio extension called AttachToAllTheThings that adds 3 handy menu items into Tools menu, one of which is "Attach to IIS". So far so good, but it would be even better to assign a hotkey to make attachments quicker, I use a combination of SHIFT + ALT + I:



3. Working with Helix you often need to run gulp tasks, that is executed from Task Runner Explorer. Normally you need, to go to View menu item then Other windows and there find out Task Runner Explorer. In a clean vanilla Visual Studio you may use CTRL + ALT + BackSpace binding. However those using ReSharper may find that combination re-mapped, so I opt-out in favour of neutral SHIFT + ALT + T combination:



4. If you are using ReSharper, you can benefit from its solution-wide code analysis tool. This is a very handy tool that is often overlooked, but it may give you plenty of insights of what's going wrong with your solution and how to fix that. But please be careful as if it is enabled permanently - if affects your performance. Double click a grey circle at the right bottom corner of Visual Studio in order to enable this feature.


After a while, it presents you with a list of issues you need to review (and likely to fix):



5. Also, one more useful trick of ReSharper will be useful for everyone working with abstractions. We got used to navigating to a class by doing CTRL + Left Mouse Click. But when doing the same on an interface, you'll navigate to the interface definition - not something useful when you expected to get some concrete implementation. Do CTRL + ALT + Left Mouse Click instead and you'll navigate to exact implementation if the is one, or will be presented with a list of all concrete classes implementing that abstraction.


6. Helix: An approach(es) for restoring WebRoot to an initial state of vanilla Sitecore installation.


7. Know your tools: The easiest way to add a new project to your Helix solution


8. Use Helix + Glass Mapper + T4 Templates = Code Generation


9. In addition to T4 Templates code generation, you may use young brother - Visual Studio code snippets. Recently Raul Jimenez prompted at https://github.com/rauljmz/Sitecore.VisualStudio.Snippets.


10. ZeroDeploy from Hedgehog, who also made TDS, Razl and Feydra. This is something unbelievable, you can't imagine that! The idea of the project is to get rid of Application Pool recycles upon deployments of code and config files. How could that be at all possible? ZeroDeploy relied on Sitecore Dependency Injection (that's why it only can run on Sitecore 8.2 or later) and instead of /bin folder it stores versioned libraries into Sitecore database, being even visible at the Sitecore tree! To make this magic possible, it is advised to separate most of your high-level abstractions into standalone libraries, that are very rarely change and that referenced from your web project. At the same time most of the concrete implementation, including Controllers, Services, Repositories and libraries down-referenced by them can be dynamically deployed and loaded back without being put to /bin, retaining the functionality. ZeroDeploy also uses Visual Studio extension and NuGet packages for Sitecore. Seriously, the magic! I am now testing a beta version of ZeroDeploy and am going to write a detailed guide on how to enable this on your development environment (your UAT / staging / prod) still remain untouched.

Hope these tips and tricks will improve your productivity!

StackOverflow 2 questions on Multi-Site configuration: Multisite Best Practice for setting up Visual Studio Project and Manage web.config in multisite solution

3. October 2015 Martin Miles (0)

Got to answer two question about multi-site configuration working with Sitecore:

1. Sitecore Multisite Best Practice for setting up Visual Studio Project (link to original question)

I'm seeking an advise on best practice that has worked for creating a asp.net MVC visual studio solution that supports multisite (multi tenant). One thing we would like to do is minimize the regression defects so that developer don't modify the wrong website code base etc.
That the solution needs to support more than 8 web sites.

2. Manage web.config in sitecore multisite solution (link to original question)

We have a multisite solution with individual visual studio solutions for each websites. Then we have master solution to build/deploy all websites.
Firstly, not sure whether it's a best practice to include web.config in Visual Studio solution. But I think all the nuget packages needs web.config to add their settings.
As a result, we have web.config for each solution. However when we deploy from master web.config gets overwritten by each sites. Could someone please suggest how this issue can be fixed?

Answers:

I have got one more alternative to address that. Currently working on a huge project, with dozens of developers and quite bureaucratic process of deployments, we have introduced the following approach:

  1. Project consists of multiple logical subparts, which in fact are individual websites.
  2. Each of those websites we set up as an MVC Area with own controllers, views etc
  3. Most important - we set up MVC Areas as individually pluggable DLLs. So each of that websites is a separate project under solution, with its own resources and statics; on build everything is copied under their required paths and DLL goes to the \bin folder.
  4. One more class library for shared (by all websites) resources, it is being referenced only by those sites, that need that functionality
  5. In Sitecore, we have the same strict principles - the content, layouts, renderings are isolated as higher as possible, no individual content may be re-used (unless from shared resources folder).

This approach serves us almost a year already and has proven for its agility, much easier deployment and fairly less code merge conflicts. If you are working under just one site - you don't need to re-compile and re-deploy everything - just replace one dll at bin folder.

Thus, combining that with your question, Approach 1 would be an answer.

References (more to read):

Regarding managing configuration, I would advise for each website (under its individual project) to create it's own App_Config/Include folder and create _project_name_.config within that folder in order to keep all site-specific settings there (for further merge into resulting config).

On build you set up (for each individual project) that file to be copied into main SITECORE_INSTANCE_WEB_ROOT\App_config\Include folder along with the rest of include patch config files.

Hope someone finds that helpful!

Attach to IIS - debugging Sitecore with just one hotkey!

17. January 2014 Martin Miles (0)

Debugging Sitecore in most cases requires you to open attach to a process menu in Visual Studio, then enable display for processes of all users, find appropriate IIS process and фееср to it. To much hassle, isn't it, especially taking into account that you may need to repeat that again and again hundreds / thousands times as a part of your work?

Ok, here's the solution to take your debugging pain off: Attach To IIS extension for Visual Studio. At the moment there are extensions for 2012 and 2013 version, as I haven't tried it in 2015 preview.





Download extensions for your Visual Studio version:

Attach_To_IIS_2012.vsix (58.6KB)